How to measure your wall

Simply take a measurement of the wall’s whole width and height. Add 10 cm (3 inches) to the width and height parameters since we always manufacture wallpaper to the precise specifications you provide when placing an order. For advice on how to measure various wall kinds, please check the samples below.

The whole wall’s width and height should be measured. Please make sure you got it correctly by checking twice. We always make your wallpaper in the precise dimensions you indicate when ordering, therefore we advise you to round up the measurements by 10 cm (3 inches) for both width and height.

Without accounting for slopes, measure the wall at its highest and broadest point. The mural will be produced in its entirety and delivered as a rectangle or square, with the slanted portion being removed during installation. We advise you to increase the width and height dimensions by 10 cm (3 inches).

The wall’s longest section should be measured for both width and height. The sloping portion of the mural is cut away during installation from the finished product, which is o en an entire rectangle or square. We advise you to round up the measurements by 10 cm (3 inches), both in width and height.

The whole wall’s width and height should be measured. Every hindrance will be removed during installation. We always make your wallpaper in the precise dimensions you indicate when buying, thus we advise you to round up your specifications by 10 cm (3 inches).

Before ordering, measure the width of each of your walls individually and add those dimensions together. As a safety precaution, add 10 cm (3 inches) on each wall. The height is then measured. Always begin at the highest point and multiply the measurement by 10 cm (3 inches). The mural does not have to be ordered in separate pieces for each different wall.

Please specify the wall’s highest and lowest points when determining its height, as with other inclined walls. The breadth follows the same logic. During installation, any sloping components will be removed. We advise you to increase the width and height dimensions by 10 cm (3 inches).