How to measure your wall

Standard Walls

Simply take a measurement of the wall’s whole width and height. Add 10 cm (3 inches) to the width and height parameters since we always manufacture wallpaper to the precise specifications you provide when placing an order. For advice on how to measure various wall kinds, please check the samples below.

Sloped Walls

The whole wall’s width and height should be measured. Please make sure you got the correct measurements by checking twice. We always make your wallpaper in the precise dimensions you indicate when ordering, therefore we advise you to round up the measurements by 10 cm (3 inches) for both width and height.

Multi Sloped Walls

Without accounting for slopes, measure the wall at its highest and broadest point. The mural will be produced in its entirety and delivered as a rectangle or square, with the slanted portion being removed during installation. We advise you to increase the width and height dimensions by 10 cm (3 inches).

Walls with windows, doors or other obstacles

The wall’s longest section should be measured for both width and height. The sloping portion of the mural is cut away during installation from the finished product, which is o en an entire rectangle or square. We advise you to round up the measurements by 10 cm (3 inches), both in width and height.

Multiple Walls

The whole wall’s width and height should be measured. Every hindrance will be removed during installation. We always make your wall mural in the precise dimensions you indicate when buying, thus we advise you to round up your specifications by 10 cm (3 inches).

Staircases

Before ordering, measure the width of each of your walls individually and add those dimensions together. As a safety precaution, add 10 cm (3 inches) on each wall. The height is then measured. Always begin at the highest point and multiply the measurement by 10 cm (3 inches). The mural does not have to be ordered in separate pieces for each different wall.

Wall murals inside moulding
All of our wall murals are made to order to ensure the perfect fit for your space. If you are planning to place the mural inside wall mouldings, it's important to measure the total width and height of the areas, including where any pattern needs to align. Openings like sockets or switches should be included in the measurements and cut out during installation. This ensures that the mural fits neatly within each panel (moulding), creating a tailored and sophisticated finish.
We advise you to increase the width and height dimensions by 10 cm (3 inches) and 5cm (2 inch) to the width for each panel.

Wall murals above wall panels

Adding a custom wall mural above classic paneling is a beautiful way to elevate a room. To get a seamless result, simply measure the full width of the wall and the height from the top of the panels to the ceiling. Our murals are designed to fit your exact dimensions, creating a stunning visual contrast between the textured paneling and the artwork above. It’s an effortless way to make your walls feel curated and complete. We advise you to increase the width and height dimensions by 10 cm (3 inches).

Please specify the wall’s highest and lowest points when determining its height, as with other inclined walls. The breadth follows the same logic. During installation, any sloping components will be removed. We advise you to increase the width and height dimensions by 10 cm (3 inches).

 

Back to Guides